97 research outputs found
Blind MultiChannel Identification and Equalization for Dereverberation and Noise Reduction based on Convolutive Transfer Function
This paper addresses the problems of blind channel identification and
multichannel equalization for speech dereverberation and noise reduction. The
time-domain cross-relation method is not suitable for blind room impulse
response identification, due to the near-common zeros of the long impulse
responses. We extend the cross-relation method to the short-time Fourier
transform (STFT) domain, in which the time-domain impulse responses are
approximately represented by the convolutive transfer functions (CTFs) with
much less coefficients. The CTFs suffer from the common zeros caused by the
oversampled STFT. We propose to identify CTFs based on the STFT with the
oversampled signals and the critical sampled CTFs, which is a good compromise
between the frequency aliasing of the signals and the common zeros problem of
CTFs. In addition, a normalization of the CTFs is proposed to remove the gain
ambiguity across sub-bands. In the STFT domain, the identified CTFs is used for
multichannel equalization, in which the sparsity of speech signals is
exploited. We propose to perform inverse filtering by minimizing the
-norm of the source signal with the relaxed -norm fitting error
between the micophone signals and the convolution of the estimated source
signal and the CTFs used as a constraint. This method is advantageous in that
the noise can be reduced by relaxing the -norm to a tolerance
corresponding to the noise power, and the tolerance can be automatically set.
The experiments confirm the efficiency of the proposed method even under
conditions with high reverberation levels and intense noise.Comment: 13 pages, 5 figures, 5 table
Semi-Supervised Sound Source Localization Based on Manifold Regularization
Conventional speaker localization algorithms, based merely on the received
microphone signals, are often sensitive to adverse conditions, such as: high
reverberation or low signal to noise ratio (SNR). In some scenarios, e.g. in
meeting rooms or cars, it can be assumed that the source position is confined
to a predefined area, and the acoustic parameters of the environment are
approximately fixed. Such scenarios give rise to the assumption that the
acoustic samples from the region of interest have a distinct geometrical
structure. In this paper, we show that the high dimensional acoustic samples
indeed lie on a low dimensional manifold and can be embedded into a low
dimensional space. Motivated by this result, we propose a semi-supervised
source localization algorithm which recovers the inverse mapping between the
acoustic samples and their corresponding locations. The idea is to use an
optimization framework based on manifold regularization, that involves
smoothness constraints of possible solutions with respect to the manifold. The
proposed algorithm, termed Manifold Regularization for Localization (MRL), is
implemented in an adaptive manner. The initialization is conducted with only
few labelled samples attached with their respective source locations, and then
the system is gradually adapted as new unlabelled samples (with unknown source
locations) are received. Experimental results show superior localization
performance when compared with a recently presented algorithm based on a
manifold learning approach and with the generalized cross-correlation (GCC)
algorithm as a baseline
Multichannel Speech Separation and Enhancement Using the Convolutive Transfer Function
This paper addresses the problem of speech separation and enhancement from
multichannel convolutive and noisy mixtures, \emph{assuming known mixing
filters}. We propose to perform the speech separation and enhancement task in
the short-time Fourier transform domain, using the convolutive transfer
function (CTF) approximation. Compared to time-domain filters, CTF has much
less taps, consequently it has less near-common zeros among channels and less
computational complexity. The work proposes three speech-source recovery
methods, namely: i) the multichannel inverse filtering method, i.e. the
multiple input/output inverse theorem (MINT), is exploited in the CTF domain,
and for the multi-source case, ii) a beamforming-like multichannel inverse
filtering method applying single source MINT and using power minimization,
which is suitable whenever the source CTFs are not all known, and iii) a
constrained Lasso method, where the sources are recovered by minimizing the
-norm to impose their spectral sparsity, with the constraint that the
-norm fitting cost, between the microphone signals and the mixing model
involving the unknown source signals, is less than a tolerance. The noise can
be reduced by setting a tolerance onto the noise power. Experiments under
various acoustic conditions are carried out to evaluate the three proposed
methods. The comparison between them as well as with the baseline methods is
presented.Comment: Submitted to IEEE/ACM Transactions on Audio, Speech and Language
Processin
Semi-supervised source localization with deep generative modeling
We propose a semi-supervised localization approach based on deep generative
modeling with variational autoencoders (VAEs). Localization in reverberant
environments remains a challenge, which machine learning (ML) has shown promise
in addressing. Even with large data volumes, the number of labels available for
supervised learning in reverberant environments is usually small. We address
this issue by performing semi-supervised learning (SSL) with convolutional
VAEs. The VAE is trained to generate the phase of relative transfer functions
(RTFs), in parallel with a DOA classifier, on both labeled and unlabeled RTF
samples. The VAE-SSL approach is compared with SRP-PHAT and fully-supervised
CNNs. We find that VAE-SSL can outperform both SRP-PHAT and CNN in
label-limited scenarios.Comment: Published in proceedings of IEEE International Workshop on Machine
Learning for Signal Processing. arXiv admin note: substantial text overlap
with arXiv:2101.1063
- …